Le 3M 468MP Adhesive Transfer Tape is a double-sided adhesive transfer tape designed for industrial applications requiring thin, precise, and durable bonding. As a partner of 3M, We offer this adhesive solution with bespoke conversion services to adapt it to the technical constraints of each project.
Le 3M 468MP Adhesive Transfer Tape is a self-adhesive tape, made up of a high-performance acrylic adhesive deposited on a polyester-coated kraft paper liner. This construction results in a thin, consistent adhesive layer. Thus, it is easily transformable for applications of bonding, fixing, laminating, or industrial assembly.
This range is particularly suited to demanding environments where shear strength, thermal endurance, and chemical resistance are important criteria. 3M 468MP is notably used for the attachment of nameplates, graphic elements, electronic components, plastic or metal parts, and industrial display solutions.
Le 3M 468MP Adhesive Transfer Tape is distinguished by a combination of properties suitable for technical bonding and industrial processing applications. According to the official product data sheet, it uses an acrylic adhesive 200MP, presents a thickness of tape without a liner of 0.127 mm, a total width of 1540 mm, and an operating temperature range between -40 °C and 204 °C.
Features | Description |
Type of adhesive | 3M 200MP High Performance Acrylic Adhesive |
Construction | Self-adhesive on kraft paper liner with polyester coating |
Adhesive thickness without liner | 0.127 mm |
Liner | 58# kraft paper with a polyester coating |
Liner thickness | 0.11 mm |
Product colour | Transparent |
Liner colour | Havana / Kraft |
Total width available | Up to 1540 mm |
Minimum operating temperature | -40 °C |
Maximum operating temperature | 204 °C |
Main resistance | Shearing, heat, solvents, moisture, UV |
Compatible materials | Metals, high surface energy plastics, rigid or decorative surfaces |
The 3M 468MP allows for the application of a consistent adhesive layer without adding excessive thickness to an assembly. This feature is important for applications where aesthetics, dimensional accuracy, or integration into a technical sub-assembly are priorities.
Its shear strength helps to limit slippage, progressive delamination, or curling on bonded parts. This makes it a suitable solution for components subjected to moderate to high mechanical stress.
The 3M 468MP exhibits good resistance to heat, solvents, moisture, and UV, according to product information provided by 3M. These properties allow its use in industrial, electronic, automotive, signage, or display environments where usage conditions can vary.
Thanks to its stable liner and ease of modification, the tape can be slit, cut, laminated or integrated into ready-to-apply adhesive parts. It is therefore suitable for mass production, manual, semi-automatic or automated assembly operations.
In industry, nameplates must remain legible, stable and correctly positioned on their substrate. 3M 468MP meets this need thanks to its good adhesion on metals and high-surface-energy plastics, as well as its shear strength.
It can be used to attach identification plates, technical badges, durable labels or marking elements to industrial equipment, electronic devices, machinery, vehicles or finished products.
In the electronics sector, adhesive solutions must enable reliable assembly without generating excessive bulk. 3M 468MP can be used for bonding films, insulators, thin components, decorative elements or protective parts.
Its finesse and stability facilitate its integration into assemblies where precision, clean application and consistent adhesive layer are essential.
For manufacturers, equipment suppliers, and subcontractors, 3M 468MP can be transformed into ready-to-install die-cut parts. This approach allows for standardised application, minimises positioning errors, and eases integration on the production line.
The 3M 468MP is suited for bonding to high surface energy metals and plastics. It can be used in light-duty attachment, decorative mounting, technical film bonding, or component positioning applications.
For manufacturers, this solution allows for the replacement of certain liquid bonding, screwing, or mechanical fastening operations where the application demands a clean finish and a reduced thickness.
Household appliances and durable consumer goods often incorporate decorative elements, finish films, brand plates, technical labels, or front panel components.
The 3M 468MP allows these elements to be attached with a low adhesive thickness, while maintaining a clean and uniform finish on visible surfaces.
As a 3M Preferred Converter, we support manufacturers in selecting, transforming, and integrating 3M adhesive solutions suited to their applications. This status reflects a close collaboration with 3M and recognised expertise in the conversion of technical adhesive materials.
Our role is to help the technical, purchasing, methods, and production teams transition from a standard material to a directly usable solution: slit rolls, cut parts, laminated sheets, adhesive kits, or components ready for integration into the line.
Combining adhesive technologies 3M In addition to our conversion capabilities, we offer solutions adapted to real industrial constraints: positioning repeatability, reduction of material waste, optimisation of formats, securing of assembly, and simplification of the production process.
An adhesive transfer tape is an adhesive tape made primarily of a layer of adhesive applied to a liner. Unlike a standard double-sided tape with a backing, it does not have an internal carrier. Once applied, only the adhesive layer remains on the part.
The 3M 468MP is generally considered to be a thicker variant of the 3M 467MP. This extra thickness can be useful when the application requires more adhesive mass, better compensation for micro-irregularities, or improved hold on certain surfaces.
The 3M 468MP is particularly suitable for high-surface-energy metals and plastics. It can be used on aluminium, steel, stainless steel, polycarbonate, polyester, or certain engineering plastics. Preliminary tests are recommended to validate adhesion on the actual substrate, especially if the surface is textured, painted, treated, or of low energy.
The product exhibits good resistance to UV rays, heat, and certain demanding environments. It can therefore be suitable for indoor or outdoor applications depending on the substrate, exposure, mechanical load, and conditions of use. Technical validation is still recommended for applications subjected to humidity, thermal cycles, or prolonged exposure.
Yes. 3M 468MP is suitable for die-cutting and custom cutting operations. It can be converted into custom adhesive parts with holes, notches, grip tabs, or specific geometries to facilitate industrial application.
Conversion allows the product to be received in a format directly suited to its final use. This reduces handling, improves repeatability, limits material waste, and facilitates integration into production. For industrial purchasing, it can also simplify inventory management and ensure application quality.
Français Français 
English (UK)
Polski
Nederlands (België)
Deutsch
Magyar
Română
Čeština
